ICT 220 / Ingenico Download Instructions (INGEMV3) (Ethernet)
Ingenico ICT220 Download Instruction.docx
Option A
- Press F Key
- Type in password 1234562, F, then Enter (F is to change 2 to the letter A)
- Select Telium Manager (might ask for default password)
- Select Initialization
- Select Hardware
- Select Ethernet Setup
- Select Boot Proto
- Select either DHCP (Dynamic IP) or Static Address
*** If Static address, you will need to enter IP address, Subnet Mask, Gateway and DNS1 ***
- Scroll to Quit
- Terminal should prompt to Save, select yes
- Terminal should restart
Option B
- Press F Key
- Type in password 1234562, F, then Enter (F is to change 2 to the letter A)
- Select Telium Manager
- Select Initialization
- Select Parameters
- Select T.M.S (must scroll down to this option)
- Select IP/Eth (must scroll down to this option)
- Screen displays SSL-PKIV1 or SSL-PKIV3, select yes
- Screen displays Profile SSL-PKIV1, select TADU_SSL
- Select IP address instead of Domain name
- Screen displays IP Address, Select IP address 209.154.100.063 (Use # for period in between numbers)
- Select Doman Name: download.tsysacquiring.net
- NOTE: Do not use F key to change numbers to letters, If you want letter A, just press number 2 two times then enter
- Screen displays PORT_PKIV1, type in 32605
- Screen displays TMS Identifier, Terminal id #’s should already there (type in terminal id with 7 replacing the V)
- Screen displays Protect download, select offScreen displays Remote Unprotected, press cancel twice until you get back to the TSYS screen
Option B
- Press F Key
- Type in password 1234562, F, then enter
(F key is to change the number 2 to the letter A)
- Select Telium Manager
- Select Evolution
- Select Remote Load
-
On the “Software” screen, press Enter
- Terminal will start downloading, when it connects properly, the terminal will display a percentage sign.
- **If terminal displays NO parameters you can retry Step 3 again. Terminal will retry download again at midnight. If it failed midnight again then terminal needs to be replace. Older software could have older version of TLS/Cipher
- Once download completed you will require to authenticate terminal before process any transaction
- Main Screen (TSYS or Name of business)
- Press #, Press 4, Press 4, terminal will prompt for authentication code
- Press 7 then F key (bottom left) 3 time it changes to S
- Press 2 then F key it changes to A
- Press 4 then F key it changes to G
- Press 3 then F key twice it changes to E
- Then enter 123 it will display SAGE123 > Press Enter
- Then Enter business zip code > Enter
- Terminal will display ACTIVATED